2005 Saab 9-3 Owner's Manual - Page 121

Instruments and controls Fan Settings High speed: This selection give a slightly higher fan speed than Medium speed though with continued automatic regulation. Medium speed: Normal automatic fan speed. This is one of the Default Settings. Low speed: This selection give a slightly lower fan speed than Medium speed though with continued automatic regulation. Convertible: Fan speed is not regulated automatically when the soft top is open. Air Distribution Auto: The ACC system adapts air temperature and distribution to the prevailing conditions. This is one of the Default Settings. Manual: Windshield: The ACC system directs almost all air to the windshield. Panel: The ACC system directs almost all air to air vents in the fascia. Floor: The ACC system directs almost all air to the floor. A/C Mode Auto: Automatic engagement and disengagement of the A/C. This is one of the Default Settings. A/C off: A/C compressor OFF (see also page 111). The A/C compressor can be activated temporarily by pressing the AC or AUTO button while on the road and if the outside temperature is above 41°F (+5°C). The A/C will be off the next time the engine is started, if the engine has been switched off for more than 2 hours. Convertible: The A/C compressor is switched off when the soft top is folded down. Further customizations to this function can be made at a Saab dealer. • The A/C compressor can be on even when the soft top is folded down. • The A/C compressor can be set to operate as when the soft top was last folded down. 119 Dual/Single Zone Dual zone: Individual temperature setting for each zone (see page 109). The system saves the settings when the engine is switched off. This is one of the Default Settings. Single zone: Common temperature setting when the engine is started. If the temperature setting for the passenger zone is changed, the system will switch to Dual zone control. Single zone control will return the next time the engine is started having been switched off for more than 2 hours.