2005 Saab 9-3 Owner's Manual - Page 27
2005 Saab 9-3 Manual
Page 27 highlights
Safety LATCH child seat installation Before starting the installation, please read through this instruction, and the child seat installation instruction. 1 Place the child restraint on one of the designated outboard rear seat cushions. 2 Slide the attachment on the child restraint in between the seat cushion and backrest. 3 Press the child restraint down on the seat, 1 in illustration. 4 Press the child restraint rearward, lining up the inner restraint attachment arm with the label, 2 in illustration. 5 Connect the restraint attachment arms to the anchorages 3 in illustration. 6 Follow the child restraint instructions to confirm that both restraint attachment arms are properly attached to the bars. 7 Attach the top tether strap to the in-car anchorage and tighten according to the restraint instructions, see page 26 and 27. 8 Pull the child restraint to make a second check that the restraint is securely attached at both the lower anchorage bars and the top tether strap. Only use the belt supplied with the child restraint. For the top tether, only use the strap supplied with the child restraint. The availability of LATCH child restraints is limited. 25 Rigid 2-point lower anchorage with top tether Semi-rigid 2-point lower anchorage with top tether When fitting child restraints in cars you must always read the instructions supplied by the child restraint manufacturer.