2006 Saturn Relay Owner's Manual - Page 19

To reinstall the bucket seats, do the following: 1. With the seat folded, squeeze the angled bar beneath the seat toward the straight crossbar, while placing the front hooks of the seat into the front two floor pins. 2. Make sure the seat is angled so that the front seat hooks clear the floor pins. If the front hooks are not attached correctly, the seat's rear hooks will not attach to the rear set of floor pins. 3. Firmly push the rear seat hooks into the rear floor pins by pushing down the rear of the seat. If the front hooks are not attaching correctly, check that the seat is in the full rear position. {CAUTION: A seat that is not locked into place properly can move around in a collision or sudden stop. People in the vehicle could be injured. Be sure to lock the seat into place properly when installing it. 1-13