1999 Subaru Legacy Owner's Manual - Page 252
1999 Subaru Legacy Manual
Page 252 highlights
Starting and operating B 2 (Second) To shift from the "3" to "2" position, push the release button. This position is for using engine braking when going down a hill or for climbing a steep grade. In this position, the transmission holds in the 2nd gear. Use this position when starting off from a standstill on slippery road surfaces such as mud or snow. It will ensure greater traction. B 1 (First) This position is for driving up or down very steep grades, or driving through mud or sand, or on slippery surfaces. In this position, the transmission holds in the 1st gear. J Maximum speeds Never drive with the tachometer needle in the critical engine speed range except for brief acceleration in an emergency. J Driving tips D Always apply the foot or parking brake when the vehicle is stopped in the "D", "3", "2", "1", or "R" position. D Always set the parking brake when parking your vehicle. Do not hold the vehicle only with the transmission. D Never shift into the "D", "3", "2" or "1" position while backing the vehicle. D Do not keep the vehicle in a stationary position on an uphill grade by using the "D", "3", "2" or "1" position. Use the brake instead. J Shift lock release If the selector lever does not move from the "P" position with the brake pedal depressed and the release button pushed in, perform the following steps: To override the shift lock: 1. Set the parking brake and stop the engine. - CONTINUED - 7-21