1999 Subaru Legacy Owner's Manual - Page 319

Appearance care Cleaning aluminum wheels D Promptly wipe the aluminum wheels clean of any kind of grime or agent. If dirt is left on too long, it may be difficult to clean off. D Do not use soap containing grit to clean the wheels. Be sure to use a neutral cleaning agent, and later rinse thoroughly with water. Do not clean the wheels with a stiff brush or expose them to a high-speed washing device. D Clean the vehicle (including the aluminum wheels) with water as soon as possible when it has been splashed with sea water, exposed to sea breezes, or driven on roads treated with salt or other agents. Cleaning fog light lens (for SUS) Counter-clockwise Light lens horizontal center line HB0296 1. Stop the vehicle in a safe place. 2. Stop the engine and turn off the fog lights. 3. Check that the fog lights are not hot. Then, grasp the fog light protector and turn it approximately 10° counter-clockwise. 4. Pull the protector off the fog light. 5. Wash the lens with water. 6. Apply the protector to the lens at an angle of approximately 10° from the fog light's horizontal center line. Then, turn the protector clockwise until it stops. Finally, check that the protector's horizontal bars are parallel with the fog light's horizontal center line. - CONTINUED - 9-7