1999 Subaru Legacy Owner's Manual - Page 46

Doors and locks B To arm the system using power door locking switches 6 7 HB1009BB 1. Close all windows and sunroofs (if so equipped). 2. Remove the key from the ignition switch. 3. Open the doors and get out of the vehicle. 4. Make sure that the engine hood and the trunk lid are locked. 5. Close the doors (and the rear gate on the wagon) but leave only the driver's door or the front passenger's door open. 6. Press the upper part of the power door locking switch ("LOCK" side) at the door to set the door locks. 7. Close the door. The horn will sound one time, the parking lights will flash one time and the indicator light on the dashboard will start flashing slowly (approximately once every two seconds) to inform you that the system has armed. NOTE The system can be armed even if the engine hood, the trunk lid, the windows and/or sunroofs are opened. Always make sure that they are fully closed before arming the system. J Disarming the system Briefly press the "UNLOCK/DISARM" button (for less than two seconds) on the remote transmitter. The driver's door will unlock, the horn will sound two times, the parking lights will flash two times and the indicator light will go off. - CONTINUED - 1-19