2000 Subaru Outback Owner's Manual - Page 389
2000 Subaru Outback Manual
Page 389 highlights
5. To install the bulb to the headlight assembly, turn it clockwise until it clicks. 6. Install the headlight bulb cover. B Except GT and OUTBACK models HBB045BB HBB046BA 1. Disconnect the electrical connector while pressing the lock release tab. 2. Remove the bulb holder from the headlight assembly by turning it counterclockwise. 3. Remove the bulb from the headlight assembly. 4. Install the new bulb. 5. Install the bulb holder in the headlight assembly by turning it clockwise until it locks. 6. Remove the electrical connector. J Front fog light (if equipped) It may be difficult to replace the bulbs. Have your SUBARU dealer replace the bulbs if necessary. J Front turn signal light, parking light and side marker light The headlight assembly must be removed before the front turn signal light and parking light bulbs can be replaced. When the headlight assembly has been removed and then reinstalled, it may become necessary to make a headlight aiming adjustment. After a bulb has been replaced, it is recommended that the headlight aiming adjustment be 11-50