2001 Subaru Legacy Owner's Manual - Page 414
2001 Subaru Legacy Manual
Page 414 highlights
Maintenance and service B Installing the wheel cover HGA013BA Align the valve with the valve hole in the cover, then fit the cover on the wheel by tapping your hand evenly around the circumference of the cover. NOTE When any of the wheels is removed and replaced for tire rotation or to change a flat tire, always check the tightness of the wheel nuts after driving approximately 600 miles (1,000 km). If any nut is loose, tighten it to the specified torque. Aluminum wheels (If equipped) Aluminum wheels can be scratched and damaged easily. Handle them carefully to maintain their appearance, performance, and safety. D When any of the wheels is removed and replaced for tire rotation or to change a flat, always check the tightness of the wheel nuts after driving approximatly 600 miles (1,000 km). If any nut is loose, tighten it to the specified torque. D Never apply oil to the threaded parts, wheel nuts, or tapered surface of the wheel. D Never let the wheel rub against sharp protrusions or curbs. D Be sure to fit tire chains on uniformly and completely around the tire, otherwise the chains may scratch the wheel. - CONTINUED - 11-41