2001 Subaru Outback Owner's Manual - Page 430

Maintenance and service 3. Using a Phillips screwdriver, remove the upper and lower screws that secure the side cover of the rear combination light assembly. 4. Remove the bulb socket from the rear combination light assembly by turning it counterclockwise. HBB025BA HBB048BA 5. Remove the bulb from the socket. Turn signal light: Pull the bulb out of the socket. Brake/tail light: Remove the bulb from the socket by pushing it and turning it counterclockwise. 6. Install a new bulb in the socket. 7. Set the bulb holder into the rear combination light assembly and turn it clockwise until it locks. 8. Fit the rear combination light assembly into the vehicle body and tighten the nuts from the interior of the vehicle. 9. Reinstall the light bulb replacement service hole covers. - CONTINUED - 11-57