2002 Subaru Forester Owner's Manual - Page 123

Instruments and controls B High/low beam change (dimmer) To change from low beam to high beam, push the turn signal lever forward. When the headlights are on high beam, the high beam indicator light "a" on the instrument panel is also on. To switch back to low beam, pull the lever back to the detent position. B Headlight flasher CAUTION Do not hold the lever in the flashing position for more than just a few seconds. To flash the headlights, pull the lever toward you and then release it. The high beam will stay on for as long as you hold the lever. The headlight flasher works even though the lighting switch is in the "OFF" position. When the headlights are on high beam, the high beam indicator light "a" on the instrument panel also comes on. B Daytime running light system WARNING The tail lights, parking lights, and side marker lights are not turned on by the daytime running light system. The light switch must always be turned to the "a" position when it is dark outside. The low beam headlights will automatically come on at reduced brightness when the engine has started, under the following conditions: D The parking brake is fully released. D The automatic transmission selector lever is set at other than the "P" position. D The light switch is in the "OFF" position. - CONTINUED - 3-17