2003 Subaru Outback Owner's Manual - Page 99
2003 Subaru Outback Manual
Page 99 highlights
Keys and doors To turn the audible signal on, unlock the doors by pushing "UNLOCK/ DISARM" button and then simultaneously depress "LOCK/ARM" and "UNLOCK/DISARM" buttons for more than two seconds. An electronic chirp will sound one time and the turn signal lights will flash two times to inform you that the audible signal has been turned on. B Replacing the battery 2 CAUTION Do not let dust, oil or water get on or in the transmitter when replacing the battery. When the transmitter battery begins to get weak, transmitter range will begin to decrease and the LED will not illuminate. Replace the battery as soon as possible. Positive (+) side facing up HB1001BA HB1002BB To replace the battery: 1. Remove the two screws on the back of the transmitter case by using a phillips screwdriver. 2. Separate the case. 3. Remove the old battery from the holder. 4. Replace with a new battery (Type CR2032 or equivalent) making sure to install the new battery with the positive (+) side facing up. 5. Install the back half of the transmitter case. 6. Reinstall the two screws on the back of the transmitter case. After the battery is replaced, the transmitter must be synchro- CONTINUED - 2-9