2006 Subaru B9 Tribeca Owner's Manual - Page 164

4-6 Climate control To change the system back to the AUTO mode, press the "AUTO" button. OFF button Temperature control dial ture settings for the driver's side and passenger's side. Each temperature setting is shown on the display. With the dial set at your desired temperature, the system automatically adjusts the temperature of air supplied from the outlets such that the desired temperature is achieved and maintained. Turning the dial counterclockwise and releasing it reduces the temperature by 1°F (0.5°C). Turning the dial clockwise and releasing it increases the temperature by 1°F (0.5°C). Holding the dial in either turned position causes the temperature to change continuously. With the minimum temperature set, the system gives maximum cooling performance. With the maximum temperature set, the system gives maximum heating performance. 400509 Driver's side 400508 The Automatic Climate Control system turns off (the air conditioner compressor and fan turn off) when the "OFF" button is pressed. When the "OFF" button is pressed, the outside air introduction mode (air inlet selection OFF) is automatically selected. 400510 Passenger's side It is possible to make separate tempera-