2006 Subaru B9 Tribeca Owner's Manual - Page 279
2006 Subaru B9 Tribeca Manual
Page 279 highlights
In case of emergency 9-9 head engages firmly into the jack-up point. Do not use oil or grease on the wheel studs or nuts when the spare tire is installed. This could cause the nuts to become loose and lead to an accident. 14.Turn the jack handle counterclockwise to lower the vehicle. 900009 900215 10.Insert the jack handle into the jackscrew, and turn the handle until the tire clears the ground. Do not raise the vehicle higher than necessary. 11.Remove the wheel nuts and the flat tire. 4 1 2 5 3 600192 600162 12.Before putting the spare tire on, clean the mounting surface of the wheel and hub with a cloth. 13.Put on the spare tire. Replace the wheel nuts. Tighten them by hand. 15.Use the wheel nut wrench to securely tighten the wheel nuts to the specified torque, following the tightening order in the illustration. The torque for tightening the nuts is 74 to 89 lbf·ft (100 to 120 N·m, 10 to 12 kgf·m). This torque is equivalent to applying approximately 88 to 110 lbs (40 to 50 kg) at the top of the wheel nut wrench. Never - CONTINUED -