2006 Subaru Forester Owner's Manual - Page 116

Instruments and controls 3-3 Ignition switch Instruments and controls your knees or hands may accidentally touch it in a way that turns the ignition switch. Never turn the ignition switch to "LOCK" while the vehicle is being driven or towed because that will lock the steering wheel, preventing steering control. And when the engine is turned off, it takes a much greater effort than usual to steer. Before leaving the vehicle, always remove the key from the ignition switch for safety and never allow an unattended child to remain in the vehicle. Failure to follow this procedure could result in injury to a child or others. Children could operate the power windows, the sunroof or other controls or even make the vehicle move. The ignition switch has four positions: LOCK, ACC, ON and START. LOCK The key can only be inserted or removed in this position. The ignition switch will lock the steering wheel when you remove the key. If turning the key is difficult, turn the steering wheel slightly to the right and left as you turn the key. Automatic transmission vehicles 300564 NOTE Keep the ignition switch in the "LOCK" position when the engine is not running. Using electrical accessories for a long time with the ignition switch in the "ON" or "ACC" position can cause the battery to go dead. If the ignition switch will not move from the "LOCK" position to the "ACC" position, turn the steering wheel slightly to the left and right as you turn the ignition switch. If the key is attached to a keyholder or to a large bunch of other keys, centrifugal force may act on it as the vehicle moves, resulting in unwanted turning of the ignition switch. Also, if a large keyholder is attached to the key, 300565 - CONTINUED -