2006 Subaru Forester Owner's Manual - Page 117

3-4 Instruments and controls "LOCK" only when the key is pushed in while turning it. sition and again try to start your engine. NOTE The engine may not start in the following cases: ACC In this position the electrical accessories (radio, accessory power outlet, etc.) can be used. ON 300566 This is the normal operating position after the engine is started. The key can be turned from "ACC" to "LOCK" only when the selector lever is in the "P" position. Manual transmission vehicles START The engine is started in this position. The starter cranks the engine to start it. When the key is released (after the engine has started), the key automatically returns to the "ON" position. 300567 The key grip is touching another key or a metallic key holder. Do not turn the ignition switch to the "START" position while the engine is running. For models with immobilizer If you fail to start your engine with your registered key, once pull out the key (at this time, the security indicator light blinks), and then insert the key in the ignition switch and turn it to the "START" po- 300115 The key can be turned from "ACC" to