2006 Subaru Forester Owner's Manual - Page 148

Climate control 4-5 Continued operation with the air inlet selection button in the ON position may fog up the windows. Switch to the OFF position as soon as the outside dusty condition clears. way to the right. 3. Set the fan speed control dial to the highest speed. If your vehicle is equipped with an air conditioner, when the " " or " " position is selected, the air conditioner compressor automatically operates regardless of the position of the air conditioner button to defog the windshield quickly. However, the air conditioner indicator light does not come on at this time. To direct warm air toward the floor and the windshield: 1. Set the air flow control dial to the " " position. 2. Set the temperature control dial to the most comfortable level. 3. Set the fan speed control dial to the desired speed. If your vehicle is equipped with an air conditioner, when the " " or " " position is selected, the air conditioner compressor automatically operates regardless of the position of the air conditioner button to defog the windshield quickly. However, the air conditioner indicator light does not come on at this time. Heater operation Defrosting or defogging the windshield NOTE Warm air also comes out from the right and left air outlets. To stop warm air flow from these outlets, turn the corresponding thumb-wheel down. Heating and defrosting NOTE Warm air also comes out from the right and left air outlets. To stop warm air flow from these outlets, turn the corresponding thumb-wheel down. 400146 To direct warm air to the windshield and front door windows: 1. Set the air flow control dial to the " " position. 2. Turn the temperature control dial all the 400147 - CONTINUED -