2006 Subaru Forester Owner's Manual - Page 338
2006 Subaru Forester Manual
Page 338 highlights
Consumer information and Reporting safety defects 13-7 asymmetrical tire that has a particular side that must always face outward when mounting on a vehicle. Accessory weight The combined weight (in excess of those standard items which may be replaced) of floor mats, leather seats and cross bars to the extent that these items are available as factory-installed equipment (whether installed or not). Curb weight The weight of a motor vehicle with standard equipment including the maximum capacity of fuel, oil, and coolant and air conditioning. Maximum loaded vehicle weight The sum of curb weight, accessory weight, vehicle capacity weight and production options weight. Normal occupant weight 150 lbs (68 kg) times the number of occupants (3 occupants). Occupant distribution Distribution of occupants in a vehicle, 2 in front, 1 in rear seat. Production options weight The combined weight of those installed regular production options weighing over 5.1 lbs (2.3 kg) in excess of those standards items which they replace, not previously considered in curb weight or accessory weight. Vehicle capacity weight The total weight of cargo, luggage and occupants that can be added to the vehicle. Vehicle maximum load on a tire Load on an individual tire that is determined by distributing to each axle its share of the maximum loaded vehicle weight and dividing by two. Vehicle normal load on a tire Load on an individual tire that is determined by distributing to each axle its share of the curb weight, accessory weight, and normal occupant weight and dividing by two. Tire care - maintenance and safety practices Check on a daily basis that the tires are free from serious damage, nails, and stones. At the same time, check the tires for abnormal wear. Inspect the tire tread regularly and replace the tires before their tread wear indicators become visible. When a tire's tread wear indicator becomes visible, the tire is worn beyond the acceptable limit and must be replaced immediately. With a tire in this condition, driving at even low speeds in wet weather can cause the vehicle to hydroplane. Possible resulting loss of vehicle control can lead to an accident. To maximize the life of each tire and ensure that the tires wear uniformly, it is best to rotate the tires every 7,500 miles (12,500 km). Rotating the tires involves switching the front and rear tires on the right-hand side of the vehicle and similarly switching the front and rear tires on the left-hand side of the vehicle. (Each tire must be kept on its original side of the vehicle.) Replace any damaged or unevenly worn tire at the time of rotation. After tire rotation, adjust the tire pressures and make sure the wheel nuts are correctly tightened. A tightening torque specification and a tightening sequence specification for the wheel nuts can be found "Flat tires" in Chapter 9. - CONTINUED -