2006 Subaru Legacy Owner's Manual - Page 99
2006 Subaru Legacy Manual
Page 99 highlights
2-12 Keys and doors then turn it from the "LOCK" position to the "ON" position 10 times within 15 seconds. NOTE When you complete step 2), an electronic tone will sound once. If you do not perform steps 1) and 2) within 45 seconds, an error will occur. An electronic tone will not sound. In this event, perform the whole procedure again beginning with part 1. 200840 LO C K 200841 1) Open and close the driver's door once. 4. Open and close the door once within 15 seconds. NOTE 1 2 When part 4 of the procedure is completed, an electronic tone will sound for 30 seconds. If you do not perform the operations in part 4 within 15 seconds, an error will occur and the electronic tone will not sound. In this event, perform the registration steps again beginning with part 3 of the procedure. 5. Before the electronic tone stops sounding, press the power door lock knob to the "LOCK" side the same number of times as the leftmost digit of the transmitter code. For example, press the lock knob eight times if the leftmost digit of the code is 8. NOTE 200721 1) LOCK 2) ON 2) Insert the key into the ignition switch, The electronic tone will stop sounding when you start entering the number. If you do not start entering the number using the lock knob before the electronic tone stops sounding, an error will occur. In this event, perform the registration steps again beginning with part 3 of the procedure. If the interval between one push of the knob and the next exceeds five sec-