2006 Subaru Outback Owner's Manual - Page 121
2006 Subaru Outback Manual
Page 121 highlights
3-6 Instruments and controls Canceling the function for meter/gauge needle movement and combination meter sequential illumination upon turning on the ignition switch To change the current setting, press the trip knob for at least two seconds. : Activated : Deactivated "LOCK" position, turn the ignition switch to the "ON" position, or open and close the driver's door during the setting procedure, the new setting will be canceled. Also, if you do not press the trip knob for a period of 10 seconds, the new setting will be canceled. NOTE It is not possible to cancel sequential illumination of the combination meter while sequential illumination is actually taking place. Cancel sequential illumination when regular illumination (for driving) has begun. 300186 300185 Speedometer The speedometer shows the vehicle speed. It is possible to activate or deactivate the movement of the meter needles and gauge needles and sequential illumination of the combination meter that take place when the ignition switch is turned to the "ON" position. Turn the ignition switch to the "ACC" position. With the A trip meter indication selected, briefly press the trip knob twice. You can now establish the activated/deactivated setting for movement of the meter needles and gauge needles when the ignition switch is turned to the "ON" position. Briefly press the trip knob again. You can now establish the activated/deactivated setting for sequential illumination of the combination meter when the ignition switch is turned to the "ON" position. To change the current setting, press the trip knob for at least two seconds. : Activated : Deactivated Briefly press the knob to return to the A trip meter indication. If you turn the ignition switch to the