2006 Subaru Outback Owner's Manual - Page 139

3-24 Instruments and controls chapter 2.) If the indicator light does not flash, it may indicate that immobilizer system may be faulty. Contact your nearest SUBARU dealer immediately. In the event that an unauthorized key (for example, an unauthorized duplicate) is used, the security indicator light comes on. Selector lever position indicator (AT vehicles) Gear position indicator (AT vehicles) SPORT mode indicator light (AT vehicles) This light comes on when the ignition switch is turned to the "ON" position and goes out after the engine has started. When the selector lever is moved to the manual gate, the SPORT mode is selected and the indicator light comes on. (Refer to the "Automatic transmission - 4-speed" or "Automatic transmission - 5-speed" section in chapter 7.) Automatic transmission control system warning If the light flashes after the engine starts, it may indicate that the automatic transmission control system is not working properly. Contact your nearest SUBARU dealer for service immediately. 300192 300266 This indicator shows the position of the selector lever. When the manual mode is selected, the gear position indicator (which shows the current gear selection) and the upshift/ downshift indicator light up. (Refer to the "Automatic transmission - 4-speed" or "Automatic transmission - 5-speed" section in chapter 7.) Turn signal indicator lights These lights show the operation of the turn signal or lane change signal. If the indicator lights do not blink or blink rapidly, the turn signal bulb may be burned out. Replace the bulb as soon as