2008 Subaru Outback Owner's Manual - Page 328

9-8 In case of emergency 10. Remove the wheel nuts and the flat tire. wheel nuts. Tighten them by hand. WARNING Do not use oil or grease on the wheel studs or nuts when the spare tire is installed. This could cause the nuts to become loose and lead to an accident. 13. Turn the jack handle counterclockwise to lower the vehicle. approximately 88 to 110 lbs (40 to 50 kg) at the top of the wheel nut wrench. Never use your foot on the wheel nut wrench or a pipe extension on the wrench because you may exceed the specified torque. Have the wheel nut torque checked at the nearest automotive service facility. 11. Before putting the spare tire on, clean the mounting surface of the wheel and hub with a cloth. 12. Put on the spare tire. Replace the 14. Use the wheel nut wrench to securely tighten the wheel nuts to the specified torque, following the tightening order in the illustration. The torque for tightening the nuts is 74 to 89 lbf·ft (100 to 120 N·m, 10 to 12 kgf·m). This torque is equivalent to applying 15. Store the flat tire in the spare tire compartment. Put the spacer and tighten the attaching bolt firmly. Also store the jack and jack handle in their storage locations. WARNING Never place a tire or tire changing tools in the passenger compartment after changing wheels. In a sudden