2008 Subaru Outback Owner's Manual - Page 351

Maintenance and service 11-5 3. Release the secondary hood release located under the front grille by moving the lever toward the left. To close the hood: 1. Lift the hood slightly and remove the hood prop from the slot in the hood and return the prop to its retainer. 2. In the case of OUTBACK models, lower the hood to a height of approximately 5.9 in (15 cm) above its closed position and then let it drop. In the case of the models except OUTBACK, lower the hood to a height of approximately 12 in (30 cm) above its closed position and then let it drop. 3. After closing the hood, be sure the hood is securely locked. If this does not close the hood, release it from a slightly higher position. Do not push the hood forcibly to close it. It could deform the metal. WARNING Always check that the hood is properly locked before you start driving. If it is not, it might fly open while the vehicle is moving and block your view, which may cause an accident and serious bodily injury. 4. Lift up the hood, release the hood prop from its retainer and put the end of the hood prop into the slot in the hood.