2009 Subaru Forester Owner's Manual - Page 245

7-36 Starting and operating only). . Shift the selector lever into the "N" position (AT vehicles only). . Shift the shift lever into neutral position (MT vehicles only). " indicator light on the combinaThe " tion meter turns off when the cruise control is canceled. & To turn off the cruise control There are two ways to turn off the cruise control: . Push the "CRUISE" main switch button again. . Turn the ignition switch to the "Acc" or "LOCK" position (but only when the vehicle is completely stopped). When the difference between the actual vehicle speed and the set speed is less than 4 mph (6.8 km/h), the set speed can be increased 1 mph (1.6 km/h) each time by pressing the "RES/ACC" button quickly. ! To increase the speed (by accelerator pedal) 1. Depress the accelerator pedal to accelerate the vehicle to the desired speed. 2. Push the "SET/COAST" button once. Now the desired speed is set and the vehicle will keep running at that speed without depressing the accelerator pedal. & To change the cruising speed ! To increase the speed (by button) NOTE If the difference between the actual vehicle speed when the button is pushed and the speed last time you set is less than 4 mph (6.8 km/h), the vehicle speed will be lowered by 1 mph (1.6 km/h). This occurs because the cruise control system unit regards this operation as that intended to decrease the vehicle speed. To resume the cruise control after it has been temporarily canceled and with vehicle speed of approximately 20 mph (32 km/h) or more, push the "RES/ACC" button to return to the original cruising speed automatically. " indicator light on the combinaThe " tion meter will automatically illuminate at this time. Push the "RES/ACC" button and hold it until the vehicle reaches the desired speed. Then, release the button. The vehicle speed at that moment will be memorized and treated as the new set speed.