2009 Subaru Forester Owner's Manual - Page 278
2009 Subaru Forester Manual
Page 278 highlights
In case of emergency 9-7 head engages firmly into the jack-up point. WARNING Do not use oil or grease on the wheel studs or nuts when the spare tire is installed. This could cause the nuts to become loose and lead to an accident. 12. Turn the jack handle counterclockwise to lower the vehicle. 8. Insert the jack handle into the jackscrew, and turn the handle until the tire clears the ground. Do not raise the vehicle higher than necessary. 9. Remove the wheel nuts and the flat tire. 10. Before putting the spare tire on, clean the mounting surface of the wheel and hub with a cloth. 11. Put on the spare tire. Replace the wheel nuts. Tighten them by hand. 13. Use the wheel nut wrench to securely tighten the wheel nuts to the specified torque, following the tightening order in the illustration. The torque for tightening the nuts is 58 to 72 lbf·ft (80 to 100 N·m, 8 to 10 kgf·m). This torque is equivalent to applying approximately 88 to 110 lbs (40 to 50 kg) at the top of the wheel nut wrench. Never - CONTINUED -