2009 Subaru Forester Owner's Manual - Page 343

11-48 Maintenance and service & Headlights (vehicles without HID headlights) CAUTION Halogen headlight bulbs become very hot while in use. If you touch the bulb surface with bare hands or greasy gloves, fingerprints or grease on the bulb surface will develop into hot spots, causing the bulb to break. If there are finger prints or grease on the bulb surface, wipe them away with a soft cloth moistened with alcohol. ! Low beam light bulbs 2. Use a screwdriver to remove the secured clip of the washer tank. To make it easy to access the bulb, move the washer tank to the horizontal direction (left-hand side). Right-hand side NOTE . If headlight aiming is required, consult your SUBARU dealer for proper adjustment of the headlight aim. . It may be difficult to replace the bulbs. Have the bulbs replaced by your SUBARU dealer if necessary. 1. Use a screwdriver to undo the clips on the air intake duct, then remove the air intake duct (right-hand side). 3. Remove the bulb cover, by turning it counterclockwise. Left-hand side