2009 Subaru Forester Owner's Manual - Page 344

Maintenance and service 11-49 7. To install the bulb to the headlight assembly, turn it clockwise until it clicks. 8. Reconnect the electrical connector. 9. Install the bulb cover. 10. Install the air intake duct with clips (right-hand side). 11. Set the washer tank to the original place and secure it by clip (left-hand side). ! High beam light bulbs 4. Disconnect the electrical connector from the bulb. 2. Disconnect the electrical connector from the bulb. Right-hand side 1. Use a screwdriver to undo the clips on the air intake duct, then remove the air intake duct (right-hand side). 5. Remove the bulb from the headlight assembly by turning it counterclockwise. 6. Replace the bulb with a new one. At this time, do not touch the bulb surface. 3. Remove the bulb from the headlight assembly by turning it counterclockwise. 4. Replace the bulb with new one. At this time, use care not to touch the bulb - CONTINUED -