2011 Subaru Forester Owner's Manual - Page 107

2-22 Keys and doors To close: Pull the switch up lightly and hold it. The window will close as long as the switch is held. ! Anti-entrapment function (type A) CAUTION . Never attempt to test this function using fingers, hands or other parts of your body. . The anti-entrapment function may not operate properly if some object gets trapped just before the window fully closes. fer to "Initialization of power window (type A)" F2-23. While closing automatically, if the window senses a substantial enough object trapped between the window and the window frame, it automatically moves down slightly and stops. ! Operating the passengers' windows ! Locking the passengers' windows 1) 2) Lock Unlock NOTE . If a window detects an impact similar to that caused by trapping an object (for example, when the vehicle is driven over a deep pothole), the anti-entrapment function may operate. . The window cannot be operated for a few seconds after the anti-entrapment function operates. . If the vehicle's battery is disconnected due to situations such as battery or fuse replacement, the antientrapment function is deactivated. Initialize the power window to reactivate the anti-entrapment function. Re- Push the lock switch. When the lock switch is in the "LOCK" position, the passengers' windows cannot be opened or closed. Push the switch again to cancel the passengers' window locking. To open: Push the appropriate switch down and hold it until the window reaches the desired position. To close: Pull the switch up and hold it until the window reaches the desired position.