2011 Subaru Forester Owner's Manual - Page 108

Keys and doors 2-23 & Power window operation by passengers Each passenger window can be controlled by the power window switch located on the door. & Initialization of power window (type A) If the vehicle's battery is disconnected due to situations such as battery or fuse replacement, the following functions are deactivated. . One-touch auto up/down function . Anti-entrapment function Initialize the power window using the following procedure to reactivate these functions. 1. Close the driver's door. 2. Turn the ignition switch to the "ON" position. 3. Open the driver's side window halfway by pushing down the power window switch. 4. Pull up the power window switch and close the window completely. Continue pulling up the switch for approximately 1 second after the window is closed completely. Rear gate To open: Push the switch down and hold it until the window reaches the desired position. To close: Pull the switch up and hold it until the window reaches the desired position. When the lock switch on the power window switch cluster, located on the driver's side door, is in the "LOCK" position, the passengers' windows cannot be operated with the passengers' switches. The rear gate can be locked and unlocked using any of the following systems. . Power door locking switch: Refer to "Power door locking switches" F2-6. . Remote keyless entry system: Refer to "Remote keyless entry system" F2-7. To open: Unlock the rear gate and push the rear gate opener button to open the rear gate. - CONTINUED -