2011 Subaru Forester Owner's Manual - Page 396
2011 Subaru Forester Manual
Page 396 highlights
Maintenance and service 11-49 7. To install the bulb to the headlight assembly, turn it clockwise until it clicks. 8. Reconnect the electrical connector. 9. Install the bulb cover. 10. Install the air intake duct with clips (right-hand side). 11. Set the washer tank to the original place and secure it by clip (left-hand side). ! High beam light bulbs surface. 5. To install the bulb to the headlight assembly, turn it clockwise until it clicks. 6. Reconnect the electrical connector. 7. Install the air intake duct with clips (right-hand side). & Position light 2. Disconnect the electrical connector from the bulb. Right-hand side 1. Use a screwdriver to undo the clips on the air intake duct, then remove the air intake duct (right-hand side). 3. Remove the bulb from the headlight assembly by turning it counterclockwise. 4. Replace the bulb with new one. At this time, use care not to touch the bulb 1. Turn the bulb socket counterclockwise and pull out the socket. 2. Pull the bulb out of the socket. 3. Install a new bulb. 4. Install the bulb socket by turning it clockwise. - CONTINUED -