2008 Suzuki Forenza Owner's Manual - Page 16

SEATS AND RESTRAINT SYSTEMS Rear Seats Folding Rear Seat Your vehicle has rear seatbacks that can be folded down to increase cargo space. To fold down the seatback, do the following: To return the seatback to the upright position, do the following: 1) Lift up the seatback and push it to its original position. Ensure that the safety belts are not twisted or caught under the seatback. 2) Push rearward firmly on the top of the seatback until it latches securely in the fully upright position. 3) For the sedan model, reconnect the center safety belt latch plate into the buckle with the black button, and make sure that the webbing is not twisted. See "Rear Center Safety Belt" later in this section. N4U1006A If your vehicle is equipped with the tiltable front head restraints, do the following to adjust it. 1) Place it in its upright position by pushing it forward fully and releasing it. 2) Push the head restraint forward carefully until it is adjusted to the desired position. WARNING If the seatback isn't locked, it could move forward in a sudden stop or crash. That could cause injury to the person sitting there. Always press rearward on the seatback to be sure it is locked. N4U1007A 1) For the sedan model, disconnect the center safety belt latch plate from the buckle with the black button, and allow the belt to retract. See "Rear Center Safety Belt" later in this section. 2) Push the rear head restraints as far down as possible. 3) Press down on the release button located on top of the rear seatback. 4) Fold the rear seatback forward and down. 1-4