2008 Suzuki Forenza Owner's Manual - Page 168
2008 Suzuki Forenza Manual
Page 168 highlights
SERVICE AND APPEARANCE CARE Headlamps 10)Reverse the steps 1 and 2 to reinstall the headlamp assembly. Then, check the lamps. 7) Install the socket into the lamp housing by turning it clockwise. 8) Reverse the steps 1 and 2 to reinstall the headlamp assembly. Then, check the lamps. Front Turn Signal Lamps Front Side marker Lamps To replace a headlamp bulb: 1) Open the hood. 2) Remove the two bolts and one nut shown in the illustration that retain the headlamp assembly. 3) Disconnect the wiring harness connector from the rear of the bulb. 4) Remove the headlamp cap by turning it counterclockwise. 5) Release the spring that retains the bulb. 6) Remove the old bulb. 7) Install the new bulb. See "Replacement Bulbs" in this section for the proper bulb. 8) Install the bulb retaining spring. 9) Install the wiring harness connector to the bulb and replace the headlamp cap by turning it clockwise. To replace a front turn signal lamp bulb: 1) Open the hood. 2) Remove the two bolts and one nut and remove the headlamp assembly. 3) Turn the front turn signal bulb socket counterclockwise. 4) Pull the front turn signal bulb socket out of the lamp housing. 5) Press the bulb inward and turn it counterclockwise to remove it from the bulb socket. 6) Install the new bulb into the bulb socket by pressing it in and turning it clockwise. See "Replacement Bulbs" in this section for the proper bulb. To replace a front sidemarker lamp bulb: 1) Open the hood. 2) Rotate the front side marker bulb socket counterclockwise. 3) Pull the front side marker bulb socket out of the front bumper. 4) Pull the old bulb straight out of the bulb socket. 5) Push a new bulb straight into the socket. 6) Reverse the steps 1 through 4 to reinstall the bulb socket. 5-24