2008 Suzuki Forenza Owner's Manual - Page 170

2008 Suzuki Forenza Manual

Page 170 highlights

SERVICE AND APPEARANCE CARE Luggage Compartment Lamp Tail/Stop Lamps, Turn Signal Lamps and Backup Lamps (Sedan) Tail/Stop Lamps, Turn Signal Lamps and Backup Lamps (Wagon) N5U5004A To replace a luggage compartment lamp bulb: 1) Use a flat screwdriver to pry the lamp assembly from the lamp assembly holder. 2) Replace the bulb. See "Replacement Bulbs" in this section for the proper bulb. 3) Reinstall the lamp assembly. To replace a tail/stop lamp bulb, a rear turn signal lamp bulb, or a rear backup lamp bulb: 1) Open the trunk. 2) Open the trim cover. 3) Remove the bulb socket by turning it counterclockwise. 4) Remove the bulb from the socket by pressing the bulb and turning it counterclockwise. 5) Install the appropriate bulb into the socket. See "Replacement Bulbs" in this section. 6) Replace the bulb socket into the lamp housing. Turn the bulb socket clockwise to secure it. 7) Replace the trim cover. 8) Close the trunk. To replace a tail/stop lamp bulb, a rear turn signal lamp bulb, or a rear backup lamp bulb: 1) Open the lift gate. 2) Remove the two screws shown in the illustration and the lamp assembly. 3) Remove the bulb socket from the lamp housing by turning the bulb socket counterclockwise. 4) Remove the bulb from the socket by pressing the bulb and turning it counterclockwise. 5) Install the appropriate bulb into the socket. See "Replacement Bulbs" in this section. 6) Replace the bulb socket into the lamp housing. 5-26

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226

5-26
SERVICE AND APPEARANCE CARE
Luggage Compartment Lamp
To replace a luggage compartment lamp
bulb:
1) Use a flat screwdriver to pry the lamp
assembly from the lamp assembly
holder.
2) Replace the bulb. See “Replacement
Bulbs” in this section for the proper
bulb.
3)
Reinstall the lamp assembly.
Tail/Stop Lamps, Turn Signal Lamps
and Backup Lamps (Sedan)
To replace a tail/stop lamp bulb, a rear turn
signal lamp bulb, or a rear backup lamp
bulb:
1)
Open the trunk.
2)
Open the trim cover.
3) Remove the bulb socket by turning it
counterclockwise.
4) Remove the bulb from the socket by
pressing the bulb and turning it counter-
clockwise.
5) Install the appropriate bulb into the
socket. See “Replacement Bulbs” in
this section.
6) Replace the bulb socket into the lamp
housing. Turn the bulb socket clockwise
to secure it.
7)
Replace the trim cover.
8)
Close the trunk.
Tail/Stop Lamps, Turn Signal Lamps
and Backup Lamps (Wagon)
To replace a tail/stop lamp bulb, a rear turn
signal lamp bulb, or a rear backup lamp
bulb:
1)
Open the lift gate.
2) Remove the two screws shown in the
illustration and the lamp assembly.
3)
Remove the bulb socket from the lamp
housing by turning the bulb socket
counterclockwise.
4) Remove the bulb from the socket by
pressing the bulb and turning it counter-
clockwise.
5) Install the appropriate bulb into the
socket. See “Replacement Bulbs” in
this section.
6) Replace the bulb socket into the lamp
housing.
N5U5004A