2008 Suzuki Forenza Owner's Manual - Page 171
2008 Suzuki Forenza Manual
Page 171 highlights
SERVICE AND APPEARANCE CARE 7) Replace the lamp housing into the vehicle using the two screws removed earlier. 8) Close the lift gate. Rear Side marker Lamps Replacement Bulbs Bulb High-Beam Headlamp Low-Beam Headlamp Front Turn Signal Lamp Front Sidemarker Lamp Wattages x Quantity 55W x 2 55W x 2 Bulb No. H1 H7 License Plate Lamps 28/8W x 2 2357NA 5W x 2 27/8W x 4 27W x 2 27W x 2 5W x 2 5W x 5 5W x 2 168 1157 1156NA 1156 168 168 168 To replace a rear side marker lamp bulb: 1) Insert your hand into the inside of the rear bumper and hold the socket. 2) Rotate the rear side marker bulb socket counterclockwise. 3) Pull the rear side marker bulb socket out of the rear bumper. 4) Pull the old bulb straight out from the bulb socket. 5) Push a new bulb straight into the socket. 6) Reverse the steps 1 through 3 to reinstall the bulb socket. Stop Lamp/ Tail Lamp Rear Turn Signal Lamp Backup Lamp License Plate Lamp Center High-Mounted Stop Lamp Rear Sidemarker Lamp N4U5029B To replace a license plate lamp bulb: 1) Remove the two screws shown in the illustration and the lamp cover. 2) To remove the bulb holder from the lamp housing, rotate the bulb holder counterclockwise. 3) Pull the bulb out from the bulb holder. 4) Replace the bulb. See "Replacement Bulbs" in this section for the proper bulb. 5) Install the bulb holder into the lamp housing by rotating the bulb holder clockwise. 6) Replace the lamp cover. 5-27