2008 Suzuki XL7 Owner's Manual - Page 38
2008 Suzuki XL7 Manual
Page 38 highlights
SEATS AND RESTRAINT SYSTEMS the child restraint with the top tether and the safety belts. Refer to your child restraint manufacturer instructions and the instructions in this manual. 1. Find the lower anchors for the desired seating position. 2. Put the child restraint on the seat. 3. Attach and tighten the lower attachments on the child restraint to the lower anchors. 2) If the child restraint manufacturer recommends that the top tether be attached, attach and tighten the top tether to the top tether anchor, if your vehicle has one. Refer to the child restraint instructions and the following steps: 1. Find the top tether anchor. 2. Route, attach and tighten the top tether according to your child restraint instructions and the following instructions: route the tether around the headrest or head restraint. (LATCH)" in this section for top tether anchor locations. Do not secure a child seat in a position without a top tether anchor if a national or local law requires that the top tether be anchored, or if the instructions that come with the child restraint say that the top strap must be anchored. 1549824 If the position you are using has an adjustable headrest or head restraint and you are using a single tether, raise the headrest or head restraint and route the tether under the headrest or head restraint and in between the headrest or head restraint posts. 3) Push and pull the child restraint in different directions to be sure it is secure. In Canada, the law requires that forwardfacing child restraints have a top tether, and that the tether be attached. If your child restraint does not have the LATCH system, you will be using the safety belt to secure the child restraint in this position. Be sure to follow the instructions that came with the child restraint. Secure the child in the child restraint when and as the instructions say. If you need to install more than one child restraint in the rear seat, be sure to read "Where to Put the Restraint" in this section. 1) Put the child restraint on the seat. 2) Pick up the latch plate, and run the lap and shoulder portions of the vehicle's safety belt through or around the restraint. The child restraint instructions will show you how. Securing a Child Restraint in a Rear Seat Position When securing a child restraint in a rear seating position, study the instructions that came with your child restraint to make sure it is compatible with this vehicle. If your child restraint has the LATCH system, refer to "Lower Anchors and Tethers for Children (LATCH)" in this section for how to install your child restraint using LATCH. If you secure a child restraint using a safety belt and it uses a top tether, Refer to "Lower Anchors and Tethers for Children 1549926 If the position you are using has an adjustable headrest or head restraint and you are using a dual tether, 1-27