2009 Suzuki SX4 Owner's Manual - Page 86
2009 Suzuki SX4 Manual
Page 86 highlights
Tachometer: Fuel Gauge: INSTRUMENT PANEL If this light blinks in red, it reminds you that the remote controller is not in the vehicle. For details, refer to "Keyless Start System Remote Controller/Keyless Entry System Transmitter" in the "BEFORE DRIVING" section. intelligent All Wheel Drive (i-AWD) AUTO Indicator Light (if equipped) For details, refer to "Using the 2WD/i-AWD Switch" in the "OPERATING YOUR VEHICLE" section. NOTE: When the vehicle speed is increased, the "i-AWD LOCK" mode will be changed to the "i-AWD AUTO" mode automatically. The "i-AWD AUTO" indicator light will come on and stay on. Turn Signal Indicators 79J040 50G055 When you turn on the left or right turn signals, the corresponding green arrow on the instrument panel will flash along with the respective turn signal lights. When you turn on the hazard warning switch, both arrows will flash along with all of the turn signal lights. When the ignition switch is turned to the "ON" position, the light comes on briefly so you can check that the light is working. When the 2WD/i-AWD switch is in the "iAWD AUTO" mode with the ignition switch in the "ON" position, the light comes on and stays on. If the light and the "i-AWD LOCK" indicator light stay on or come on simultaneously when driving, there may be something wrong with the i-AWD system. Have the system inspected by an authorized SUZUKI dealer. If the oil temperature of the parts for i-AWD system is high, this light will blink. The "iAWD AUTO" or "i-AWD LOCK" mode will be changed to the "2WD" mode automatically to prevent a damage of the parts for iAWD system. NOTE: If you restart the engine, the light will stop blinking temporarily. intelligent All Wheel Drive (i-AWD) LOCK Indicator Light (if equipped) 79J100 When the ignition switch is turned to the "ON" position, this light comes on briefly so you can check that the light is working. The light comes on when the 2WD/i-AWD switch is changed to the "i-AWD LOCK" mode from the "i-AWD AUTO" mode. If the light and the "i-AWD AUTO" indicator light stay on or come on simultaneously when driving, there may be something wrong with the i-AWD system. Have the system inspected by an authorized SUZUKI dealer. High Beam Indicator Light 50G056 This indicator comes on when headlight high beams are turned on. 4-9 80J22-03E