2010 Suzuki Kizashi Owner's Manual - Page 125

BEFORE DRIVING Turn Signal Operation After changing the ignition mode to "ON" by pressing the engine switch, move the lever up or down to activate the right or left turn signals. Normal turn signal Lane change signal Hazard Warning Switch EXAMPLE EXAMPLE 57L21067 EXAMPLE 57L21068 Move the lever part-way in the direction to turn and hold it there. • The turn signal and its indicator flash while the lever is held at the moved position. The turn signal and its indicator flash three times even if you return the lever immediately after moving it. NOTE: You can customize the setting for the number of times of flashing of the turn signal and its indicator (1 to 4 times). Please ask an authorized SUZUKI dealer for the customization. 57L21066 Push in the hazard warning switch to activate the hazard warning lights. All turn signal lights and both turn signal indicators will flash simultaneously. To turn off the lights, push the switch again. Use the hazard warning lights to warn other traffic during emergency parking or when your vehicle could otherwise become a traffic hazard. Move the lever all the way upward or downward to signal. When the turn is completed, the signal will cancel and the lever will return to its normal position. 2-106