2010 Suzuki Kizashi Owner's Manual - Page 134
2010 Suzuki Kizashi Manual
Page 134 highlights
OPERATING YOUR VEHICLE TION SWITCH POSITION "ACC". Refer to "Information Display" in the "Before Driving" section for details. ON • With the engine off You can use such electric equipment as the power windows and wipers with the engine off. When this ignition mode is selected by pressing the engine switch, the information display in the instrument cluster shows the following message: IGNITION SWITCH POSITION "ON". • With the engine on All electric equipment is operational. The vehicle can be driven when you have selected this ignition mode by pressing the engine switch. START CVT - Provided you have the keyless start system remote controller with you, the engine automatically starts when you press the engine switch to select this ignition mode after placing the gearshift lever in the "P" position and depressing the brake pedal. (If you need to re-start the engine while the vehicle is moving, shift into "N".) Manual Transaxle - Provided you have the keyless start system remote controller with you, the engine automatically starts when you press the engine switch to select this ignition mode after shifting to "N" (Neutral) and depressing the brake and clutch pedals. NOTE: You do not need to keep the engine switch pressed to start the engine. Unreleased Steering Lock Warning If the steering lock remains engaged when you press the engine switch to change the ignition mode to "ON", the information display in the instrument cluster will show a message to alert you to that condition. Refer to "Information display" in the "Before Driving" section for details. CAUTION Do not leave the engine switch in the "ACC" or "ON" mode when the engine is not running. Avoid using the radio or other electric accessories for a long time when the engine switch is in the "ACC" or "ON" mode when the engine is not running, otherwise the battery may discharge. NOTE: • The steering lock may not be released if some load is acting on the steering wheel. If this happens, turn the steering wheel to the right or left to relieve it from the load before you press the engine switch again to change to the desired ignition mode. • In the presence of strong radio signals or noise, you may not be able to change the ignition mode to "ACC" or "ON" or to start the engine using the engine switch. In this case, the information display on the instrument cluster will show the following message: KEY FOB NOT DETECTED. 3-3