2010 Suzuki Kizashi Owner's Manual - Page 136
2010 Suzuki Kizashi Manual
Page 136 highlights
OPERATING YOUR VEHICLE • When selecting the power supply modes, the information display in the instrument cluster shows certain messages. Refer to "Information Display" in the "Before Driving" section for details. 1) Without depressing the brake pedal, push the engine switch (1). 2) Within about 10 seconds during which the master warning indicator light in the instrument cluster is flashing and the "PLACE KEY FOB ON START SWITCH" message appears on the information display, touch the engine switch with the lock switch end of the remote controller (2) for about 2 seconds. NOTE: • If you still cannot select the power supply modes, there may be some problem with the keyless start system. Contact an authorized SUZUKI dealer for an inspection of the system. • The immobilizer/keyless start system warning light will light for about 5 seconds while the master warning indicator light is flashing. In addition, the information display in the instrument cluster will show a message during this time. Refer to "Information Display" in the "Before Driving" section for details. • You may customize the system to cause the interior buzzer to sound once for the "remote controller out of sensing range" warning. To incorporate this customization, please contact an authorized SUZUKI dealer. • If the battery of the remote controller is about to become completely discharged, the corresponding message will appear CVT Gearshift lever in P LOCK (OFF) ACC (Audio equipment) Gearshift lever in a position other than ON P 57L31006 Manual transaxle If the master warning indicator light flashes and the power supply modes cannot be selected Your keyless start system remote controller may not be sensed as being within the "interior workable area" (Refer to the related explanation in this section). Try again after making sure you have the remote controller with you. If the power supply modes still cannot be selected, the battery of the remote controller may be discharged. To be able to select a power supply mode, you must then use the following method: LOCK (OFF) ACC (Audio equipment) ON (1) 57L31033 (2) NOTE: • CVT - If the gearshift lever is in any position other than "P", the ignition mode cannot be returned to "LOCK" (OFF). 57L21124 3-5