2010 Suzuki Kizashi Owner's Manual - Page 204

OTHER CONTROLS AND EQUIPMENT CAUTION • Never insert your finger or hand into the CD insertion slot. Never insert foreign objects. • Never insert a CD with glue coming out from adhesive tape or a rental CD label or with a trace indicating that adhesive tape or a rental CD label has been removed. This may cause the CD not to eject or result in a malfunction. Selecting a CD mode Press the CD button (3). Each time the button is pressed, the source is switched as follows: • A CD is inserted with its label facing upward. • When there is a CD already loaded in the unit, another CD cannot be loaded at the same time. Do not use force when inserting the CD into the CD insertion slot. • If a blank disc (non recorded CD-R) is loaded in the unit, the disc will be ejected. Ejecting a CD Press the Eject button (2). If you left a CD ejected for a period of about 15 seconds, it will be automatically drawn inside the unit. (Auto reload function, only at ACC off) The backup eject function: This function allows you to eject a CD with the ACC power turned off by pressing the Eject button (2). CAUTION If you forcefully try to push an ejected CD inside the unit before auto reloading, the disc surface might be scratched. Eject completely before reloading. Listening to a CD When a CD is inserted, it is automatically played back. When a CD is already inside the unit, press the CD button (3) to play back the CD. (A) • CDs or CD-ROMs carrying no mark (A) cannot be used. • Some discs previously recorded in CDR\CD-RW format may not be used. CD Bluetooth® audio Loading a CD Insert a CD in the Insertion slot (1). When a CD is loaded, play starts. 5-25