2010 Suzuki Kizashi Owner's Manual - Page 246

OTHER CONTROLS AND EQUIPMENT The anti-theft feature is intended to discourage theft or the audio system by preventing the system from operating when it is moved to a different vehicle. This feature works by allowing you to enter a Personal Identification Number (PIN). When the audio system is disconnected from its power source, such as when the audio system is removed or the battery is disconnected, the system will not operate again unless the PIN is reentered. Setting the Anti-Theft Function 1) Press the VOL PUSH POWER knob (1) to power off. 2) Press the Preset buttons (2) 1, 6 and VOL PUSH POWER knob (1) simultaneously. "SECURITY" is displayed. 3) Press the Up button (3) and Preset button (2) 1 simultaneously. 4) Enter a 4-digit PIN number using the Preset buttons (2) 1-4. 5) Hold down TUNE FOLDER PUSH SOUND knob (4) for 1 sec. or more. NOTE: Write down your PIN for the future use. Canceling the anti-theft feature This operation is to be done when you want to cancel the anti-theft function or change your PIN. 1) Press the Preset buttons (2) 1, 6 and the VOL PUSH POWER knob (1) simultaneously. 2) Press the Up button (3) and Preset button (2) 1 simultaneously. 3) Enter a 4-digit PIN number using the Preset buttons (2) 1-4. 4) Hold down the TUNE FOLDER PUSH SOUND knob (4) for 1 sec. or more. NOTE: To change your PIN, first delete your current PIN, then set a new one. Confirming Your Personal Identification Number (PIN) When the main power source is disconnected such as when you exchange your battery, etc, you will have to confirm your PIN to be able to use the audio system. 1) Press the engine switch to change the ignition mode to "ACC". 2) Press the Up button (3) and Preset button (2) 1 simultaneously. 3) Enter a 4-digit PIN number using the Preset buttons (2) 1-4. 4) Hold down the TUNE FOLDER PUSH SOUND knob (4) for 1 sec. or more. If the PIN that you input matches the registered PIN, the power of the audiosystem will turn off, and you will be able to operate the audio system. NOTE: If you input your PIN incorrectly, "ERROR" will be displayed. If you enter an incorrect PIN more than 10 times, "HELP" will be displayed and you can not perform any further operation. 5-67