2010 Suzuki Kizashi Owner's Manual - Page 51
2010 Suzuki Kizashi Manual
Page 51 highlights
BEFORE DRIVING To reinstall the head restraints, do the following: With the correct side facing forward, insert the head restraint into the seat until it is locked at a height. Then adjust the height as desired. Folding Rear Seats The rear seats of your vehicle can be folded forward to provide additional cargo space. To fold the rear seats forward: (1) WARNING Always check that the head restraint is firmly in position after installing it. Avoid installing it with the backside facing forward. A wrongly facing head restraint does not provide the intended protection, and also its height cannot be adjusted. 57L30038 4) Pull the release lever (1) on the top of each split seat, and fold the seatbacks forward. 57L30037 1) Stow the seatbelt for the rear center seat in the retractor behind the head restraint and retain its end in the holder so that the seatback for the left seating place can be folded. 2) Adjust all the head restraints to the lowest positions. In addition, tip forward the head restraints for the right and left seats. 3) Detach the seat belts for the right and left seats from the seatbacks as shown in the illustration so the belts are not caught when the seatbacks are moved. CAUTION After folding the rear seatback forward, do not allow any foreign material to enter the lock opening. This may cause damage to the inside of the lock and prevent the seatback from being locked securely. 2-32