2010 Suzuki Kizashi Owner's Manual - Page 62

BEFORE DRIVING changed to "LOCK" (OFF) by pressing the engine switch. Front passenger's seat belt reminder (if equipped) The front passenger's seat belt reminder will activate only when there is a passenger sitting in the front seat. In some situations, however, such as when you place heavy objects in the front seat, the seat belt reminder can be activated as if there were a passenger present. The front passenger's seat belt reminder works in the same manner as the driver's seat belt reminder, except that it is not activated until 10 seconds after the ignition mode is changed to "ON" by pressing the engine switch. Shoulder Anchor Height Adjuster EXAMPLE Seat Belt Inspection EXAMPLE 57L21045 65D209S Adjust the shoulder anchor height so that the shoulder belt rides on the center of the outside shoulder. To upward, slide the anchor up. To downward, slide the anchor down while down the lock lever. After adjustment, make sure that the anchor is securely locked. Periodically inspect the seat belts to make sure they work properly and are not damaged. Check the webbing, buckles, latch plates, retractors, anchorages and guide loops. Replace any seat belts which do not work properly or are damaged. WARNING Be sure that the shoulder belt is positioned on the center of the outside shoulder. The belt should be away from your face and neck, but not falling off your shoulder. Misadjustment of the belt could reduce the effectiveness of the safety belt in a crash. 2-43