1996 Toyota Land Cruiser Owners Manual - Page 50

Emergency flashers For high beam, push the lever away from you. Pull it toward you for low beam. For the headlight flasher, pull it further back. A blue light in the instrument panel indicates high beam is on. The headlight flasher works even when the headlight switch is off. For signaling turns, move the lever up or down in the conventional manner. The key must be in the "ON" position. The turn signal is self-cancelling after a turn, but after a lane change, you may have to cancel it by hand. You can also signal a lane change by moving the turn signal lever partway and holding it there. If the green light in the instrument panel flashes faster than normal, It indicates that the front or rear turn signal bulb has burned out. To turn on the emergency flashers, push the switch. All the turn signal lights will flash. Turn on the emergency flashers to warn other drivers if your vehicle must be stopped where it might be a traffic hazard. Always pull your vehicle as far off the road as possible. The turn signal light switch will not work when the emergency flashers are operating. NOTICE To prevent the battery from being discharged, do not leave the switch on longer than necessary when the engine is not running. 44