1996 Toyota Land Cruiser Owners Manual - Page 96

This function does not work properly unless the blank portions on the tape have 3 seconds or more between one program and another. "SKIP" button: Use for automatic skipping of blank portions between programs. Push the "SKIP" button. "SKIP" appears on the display. The player will automatically skip any blank portions of 15 seconds or more and play the next program, even if it is on the other side. To cancel it, push the button once again. "SCAN" button: Use for program-toprogram scanning. Push the "SCAN" button. With "SCAN" on the display, each program will be played for 12 seconds and scan to the next. To continue listening to the program of your choice, simply push the "SCAN" button once again. The player will automatically reverse directions at the end of the tape and keep scanning. "R⋅M" button (radio monitor system): Use for automatic station reception. Push the "R⋅M" button. "R⋅M" appears on the display. In this mode, if you push the REWIND or FAST FORWARD button when listening to the tape, the system will change the radio mode and automatically receive the last station which was set. At the time, the received station condition appears on the display. The system will be cancelled out when the power source is severed (battery disconnected, burnt fuse, etc.) (i) Listening to the compact Disc This Compact DIsc player does not need to use an adaptor for 8 cm (3.2 in.) Discs. Do not use an adaptor when listening to 8 cm (3.2 in.) Discs, which cause tracking errors or interfere with Disc ejection. 1. Put the Compact Disc into the slot, with the label side up and lightly push it in. The Disc player will grab the Disc and slide it into place to play it from the track 1 program. As this is done, the "DISC" light will come on. The track number will appear on the display. If the Compact Disc is already in the slot, push the "CD" button. The Compact Disc player can also be turned on by pushing the "PWR VOL" knob if the Compact Disc player was playing when the system was turned off by pushing the knob. If the radio or cassette tape player is on when playing the Disc, it will automatically turn off. If the Disc is inserted with the label side down, the Disc will automatically be ejected. 2. Turn the "PWR VOL" knob to adjust the volume. 3. Select your program. (See "(j) Selecting a program".) When the end of the Disc is reached, the player starts playing the track 1 program again. 4. Adjust the tone and sound balance. (See "(d) Adjusting the tone" and "(e) Adjusting the sound balance".) 5. Push the EJECT button to eject the Disc. As this is done, the Compact Disc player will turn off. If the radio or cassette tape player was on when the Disc was inserted, it will automatically turn on again. 6. Push the "PWR VOL" knob to turn the Compact Disc player off. 90