1997 Toyota Land Cruiser Owners Manual - Page 109

-Car audio system operating hints If you pushed any wrong buttons, "Err" and the number of errors you have made will appear on the display before "SEC" does. Go back to step 2 and try again. If the display returns to "---" while you are entering the code, go back to step 3. To make sure the security code has been accepted, turn the ignition to "LOCK" and then back to "ACC". "SEC" should appear on the display. 4. The three-digit code should be on the display. Push and hold in "SCAN" until the display goes dark. (At first, "SEC" will appear on the display.) NOTICE A tenth error will activate the anti-theft system and "HELP" will appear on the display. The audio system will be completely inoperable. At this time, the anti-theft light also comes on. If this occurs, contact your Toyota dealer. NOTICE To ensure the correct audio system operation: zBe careful not to spill beverages over the audio system. zDo not put anything other than a cassette tape or Compact Disc into the slot. ILLUMINATION CONTROL LOGIC On some audio-units, when the instrument panel lights are on, the letters on operable buttons of the mode in current use light up together with the mode selection and eject buttons. RADIO RECEPTION Usually, a problem with radio reception does not mean there is a problem with your radio-it is just the normal result of conditions outside the vehicle. For example, nearby buildings and terrain can interfere with FM reception. Power lines or telephone wires can interfere with AM signals. And of course, radio signals have a limited range, and the farther you are from a station, the weaker its signal will be. In addition, reception conditions change constantly as your vehicle moves. 102