1997 Toyota Land Cruiser Owners Manual - Page 177

Replacing light bulbs- The following illustrations show how to gain access to the bulbs. When replacing a bulb, make sure the ignition switch and light switch are off. Use bulbs with the wattage ratings given in the table. ! CAUTION Halogen bulbs have pressurized gas inside and require special handling. They can burst or shatter if scratched or dropped. Hold a bulb only ty its plastic or metal case. Do not touch the glass part of a bulb with bare hands. To check the headlight aim, check the vertical and horizontal gauges. 1. Look at the beam angle gauge (vertical movement). The bubble of the gauge should not deviate from the center of the gauge by more than two marks on either the upward or downward scale of the gauge. 2. Look at the beam angle gauge (horizontal movement). The red mark should not deviate by more than one mark on either side of the gauge. If the error is over the value specified above, take the vehicle to your Toyota dealer to adjust the headlight aim. NOTICE Only us e a bulb of the listed type. Light bulbs Head lights (inner) Head lights (outer) Front turn signal lights Parking and front side marker lights Bulb No. 9005 9006 1156 168 W 65 55 27 5 Type A B C D 190