1998 Toyota Tacoma Owners Manual - Page 166

'98 Tacoma (U) 3. If the engine in the vehicle with the booster battery is not running, start it and let it run for a few minutes. During jump starting, run the engine at about 2000 rpm with the accelerator pedal lightly depressed. Discharged battery Jumper cable Booster battery Positive terminal ("+" mark) Jumper cable Positive terminal ("+" mark) Discharged battery Booster battery Negative terminal ("- " mark) 4. Make the cable connections in the order a, b, c, d. a. Connect the clamp of the positive (red) jumper cable to the positive (+) terminal on the discharged battery. b. Connect the clamp at the other end of the positive (red) jumper cable to the positive (+) terminal on the booster battery. c. Connect the clamp of the negative (black) jumper cable to the negative (-) terminal on the booster battery. d. Connect the clamp at the other end of the negative (black) jumper cable to a solid, stationary, unpainted, metallic point of the vehicle with the discharged battery. The recommended connecting points are shown in the following illustrations: 166