2000 Toyota Avalon Owners Manual - Page 184

'00 AVALON U (L/O 9908) Compact Disc Player If you want to fast forward or reverse through a compact disc track, push and hold in the fast forward or reverse button. When you release the button, the compact disc player will resume playing. AM Push "AM" to turn on the radio and select the AM band. "AM" will appear on the display. If the audio system is off, you can turn on the radio by pushing "AM". Also, push "AM" to switch from cassette or compact disc operation to radio operation. AUDIO CTRL / MODE (Audio control and mode adjustment) Manual tone adjustment function- This knob is used to adjust the tone manually. For low- pitch tone adjustment, push "AUDIO CTRL / MODE" repeatedly until "BASS" appears on the display. Then turn the knob to suit your preference. The display will show the range from "BASS -5" to "BASS 5". For middle- pitch tone adjustment, push "AUDIO CTRL / MODE" repeatedly until "MID" appears on the display. Then turn the knob to suit your preference. The display will show the range from "MID - 5" to "MID 5". For high- pitch tone adjustment, push "AUDIO CTRL / MODE" repeatedly until "TREB" appears on the display. Then turn the knob to suit your preference. The display will show the range from "TREB -5" to "TREB 5". Sound balance adjustment function- This knob is also used to adjust the sound balance between the front and rear, and the right and left speakers. For front/rear adjustment, push "AUDIO CTRL / MODE" repeatedly until "FADE" appears on the display. Then turn the knob to adjust the front/rear balance. The display will show the range from "FADE FRONT 7" to "FADE REAR 7". For left/right adjustment, push "AUDIO CTRL / MODE" repeatedly until "BAL" appears on the display. Then turn the knob to adjust the left/right balance. The display will show the range from "BAL LEFT 7" to "BAL RIGHT 7". CD (Compact Disc) Push "CD" to switch from radio or cassette operation to compact disc operation. If the audio system is off, you can turn on the compact disc player by pushing "CD". In both cases, a disc must already be loaded in the player. When the audio is set into compact disc operation, the display shows the track or, track and disc number currently being played. If the player or another unit equipped with the player malfunctions, your audio system will display one of the six following error messages. If "WAIT" appears on the display, it indicates that the inside of the player unit may be too hot due to the very high ambient temperature. Remove the disc or magazine from the player and allow the player to cool down. If "Err 1" appears on the display, it indicates the disc is dirty, damaged, or it was inserted up- side down. Clean the disc or insert it correctly. If "Err 2" appears on the display, it indicates no disc is loaded inside the magazine. Insert a disc. 184