2000 Toyota Avalon Owners Manual - Page 220

2000 Toyota Avalon Manual

Page 220 highlights

'00 AVALON U (L/O 9908) Garage door opener PROGRAMMING OPENER THE GARAGE DOOR If the transmitter has a "rolling code" feature, it is necessary to program the garage door opener receiver on the garage after programming the garage door opener on the vehicle. For the setting of the receiver, refer to the instruction manual for the receiver. After setting the receiver, push the programmed button on the vehicle for about 1 to 2 seconds within the operational range. The old- type garage door openers manufactured before 1982 cannot be programmed with this system. This garage door opener has 3 buttons and you can store one program for each button. 1. Decide which one of the 3 buttons you want to program. Push and hold down one of the buttons until the indicator light begins to flash. 2. While holding this button, bring the original garage door opener closer to the garage door opener equipped on the vehicle within about 25 mm (1 in.) and push the button on the original garage door opener. This signal from the original garage door opener is sent to the one to be programmed. 3. When the frequency and code is registered, the indicator light flashes rapidly. Then you can release both buttons. 4. If you wish, repeat the procedure for each remaining button for another garage door opener. If you want to write a new program over the program set already, select a button you want to program and repeat the procedure from step 1. The previous program is erased and a new program will be set. Garage door openers manufactured under the license from HomeLinkr and can be programmed to operate garage doors, estate gates, security lighting, etc. CAUTION When programming or operating the garage door opener, make sure there is no one around the moving door. It is dangerous if someone is caught. OPERATING OPENER THE GARAGE DOOR Push the appropriate button to activate the garage door opener. The indicator light comes on. The garage door opener continues to send the signal for up to 20 seconds as long as the button is pushed. 220

We apologize, but we cannot currently deliver this PDF manual by request of the manufacturer.

We apologize for any inconveniece.