2001 Toyota Highlander Owners Manual - Page 20

'01 HIGHLANDER_U (L/O 0106) If the "LOCK" or "UNLOCK" switch is kept pressed in, the locking or unlocking operation is not repeated. Release the button and then push again. The wireless door locking or unlocking function can be erased. For details, contact your Toyota dealer. SWITCHING BEEP SOUND ON AND OFF You can switch the beep on and off. (The beep is on initially and after battery replacement.) To switch the beep on and off: With the driver's door opened- 1. Insert the ignition key and remove it. 2. Within 5 seconds, insert the ignition key again and turn it to the "ON" position. 3. After 10 seconds, push the same "LOCK", "UNLOCK" or "PANIC" button twice within 10 seconds. Two beep sounds inform you that the program has been switched on or off. If this procedure is not followed exactly, the beep will not operate as expected. Check the beep ON/OFF operation by pushing the transmitter switch after you finish this procedure. If the beep does not operate as expected, repeat this procedure from step 1. "PANIC" SWITCH Pushing the "PANIC" switch blows the horn intermittently and flashes the headlights and tail lights. The "PANIC" switch is used to deter vehicle theft when you witness anyone attempting to break into or damage your vehicle. The alarm will last for one minute. To stop alarm midway, do the following: D Push the "PANIC" switch once again. D Unlock any of side door or back door with the key or wireless remote control transmitter. D Turn the ignition key from the "LOCK" to "ON" position. 20 2001 MY HIGHLANDER_U (OM48432U)